Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateFast, Reliable Fire Damage Restoration Across Bloomingdale
Fire damage restoration in Bloomingdale typically costs between $2,800 and $9,500 depending on how far smoke and soot traveled through the home, and whether water from fire suppression soaked into the slab. We respond to Bloomingdale homes within hours, not days, because we know what a wet Florida slab does to charred drywall when it sits. Rick Sumner leads our crews, and you can reach a live person 24/7 at (850) 828-8896.
Bloomingdale’s flat terrain and high water table create a problem most homeowners don’t anticipate. When firefighters put out a kitchen fire or garage blaze, hundreds of gallons of water pool against the slab-on-grade foundation. Within 48 hours, moisture wicks up through the concrete and hides behind baseboards. Then mold starts where you can’t see it. We check for that first, every time.
Why Tidemark Water Damage Tampa Is Bloomingdale’s Preferred Fire Damage Restoration Company
Bloomingdale homeowners call us because we treat the whole problem, not just the black on the walls. The homes here, mostly single-family ranch builds from the 1970s through 1990s along Bell Shoals Road, Bloomingdale Avenue, and the streets branching off Lithia-Pinecrest, share a common vulnerability: gypsum drywall over slab foundations. Smoke pushes into that drywall, and fire hose water seeps under it. Our Fire Damage Restoration crews are trained to find both layers of damage in one pass.
Rick Sumner has walked enough Bloomingdale ranch homes to know where soot hides: the backside of closet doors, inside the HVAC return plenum, and along the ceiling texture in homes built before popcorn was banned. His team shows up with shoe covers already on and drop cloths staged before the first air mover comes off the truck. That matters when there are kids and pets still in the home and a family trying to keep normal life going around a bad week.
We also carry commercial-grade drying equipment from Dri-Eaz and Phoenix, because a residential dehumidifier from a big-box store cannot pull water out of a Bloomingdale slab. Our technicians hold IICRC and RIA credentials, which means they know the difference between surface cleaning and structural drying. Most Bloomingdale jobs are completed in one visit for the urgent work, with a clear written scope provided before anything is touched.
Restoration work we handle






Soot Removal in Bloomingdale
Soot removal in Bloomingdale runs between $1,200 and $3,400 for most single-story ranch homes, depending on the square footage affected and whether textured ceilings need cleaning. Soot isn’t just dirt you can wipe away. It’s oily, acidic, and it bonds to porous surfaces like gypsum drywall and wood trim. Left untreated, it continues off-gassing that smoke smell for months. We dry-sponge walls and ceilings first, then use HEPA vacuuming and chemical sponges on stubborn deposits, and we protect your floors with drop cloths before any ladder goes up.
Ceiling and wall soot on textured surfaces
Most Bloomingdale homes built in the 1980s and 1990s have textured ceilings that trap soot in every ridge and crevice. We use low-pressure dry sponging rather than wet scrubbing, because moisture drives soot deeper into the texture. For heavy deposits on smooth drywall, we follow with a degreasing wash that breaks the smoke bond without delaminating the paper face.
Smoke odor embedded in drywall
Here’s the thing about Bloomingdale slab homes: smoke does not politely stay in one room. It travels through the HVAC system and settles inside wall cavities. We run a thermal fogger or ozone treatment after surface soot is removed, and we check the return plenum and air handler. If the drywall itself is saturated with smoke residue, painting over it fails. We remove and replace the affected sections, because sealing odor in place just means you’ll smell it again the first humid August afternoon.
Fire Damage Restoration Company in Bloomingdale
A fire damage restoration company in Bloomingdale needs to handle more than boarding up a window and scrubbing walls. Most full-service fire cleanup jobs in this area run $4,500 to $9,500 when you include board-up, soot removal, water extraction from suppression efforts, structural drying, and sealing or replacing damaged drywall. We coordinate every step under one crew so you’re not juggling six vendors while your home sits open. Our team documents everything with photos, works directly with your adjuster if a claim is filed, and leaves you with a written scope before any work begins.
Emergency board-up and structural stabilization
After a fire, Bloomingdale homes need protection from afternoon thunderstorms. An open roof or missing window will let in rain and turn a fire loss into a water loss. We board up vulnerable openings the same day we arrive, using temporary framing that secures against wind and keeps animals out. Then we assess the charred framing and drywall to determine what can be cleaned versus what must be replaced.
Coordinating with your insurance adjuster
Most Bloomingdale homeowners file a claim after a fire, and adjusters respond faster when a restoration company provides organized documentation. We photograph every affected room before cleanup, inventory damaged personal property, and write the scope in language insurers recognize. The written price we give you is the same number we stand behind, and we bill your carrier directly when they approve the work. No surprise supplements after the fact, no inflated final invoice.
Trusted Brands We Service in Bloomingdale
We service and work alongside the equipment brands Bloomingdale homeowners already know: Dri-Eaz air movers and dehumidifiers, Phoenix desiccant units, and Injectidry systems for drying inside wall cavities. Because we stock these units on our local trucks, we don’t wait for equipment to ship from a regional warehouse. For a Bloomingdale home with a soaked slab after a fire, that same-day availability is the difference between drying the home and fighting mold for the next month. Our RIA-credentialed technicians know how to set up airflow around slab foundations and low-slope roofs, which is the challenge this area presents on nearly every job.
See the difference
Before
After
Before
After
Before
AfterCommon Fire Damage Restoration Problems We See in Bloomingdale Homes
- Water from fire suppression pooling against slab foundations. Bloomingdale homes sit on flat, low-lying lots with a high water table. When the fire department runs hose lines, that water has nowhere to drain, so it sits against the slab and wicks into interior drywall within 48 hours.
- Original cast iron plumbing weakened by heat. Many 1970s and 1980s Bloomingdale ranch homes still have cast iron drain lines. Heat from a fire can crack or warp these pipes, and if they leak after cleanup, you get hidden water damage all over again. We check the plumbing runs near the fire source before closing walls.
- Stucco exteriors trapping moisture after a fire. The stucco-over-slab construction common in Bloomingdale means exterior walls have little room for moisture to escape. After fire suppression, that trapped water creates hidden mold behind baseboards and along bottom plates, which is exactly where we look first.
- Garage-converted workshops and tool shops. Bloomingdale has a lot of detached garages and converted woodshops. Fires in these spaces leave soot on tools, machinery, and raw lumber, and require specialized cleaning that a standard house-cleaning crew cannot handle. We pack out tools, clean them individually, and dry the structure before returning everything.
Pricing for Fire Damage Restoration in Bloomingdale, FL
Here are honest numbers for Bloomingdale. Soot and smoke cleanup alone runs $1,200 to $3,400 for most ranch homes. Full fire damage restoration including board-up, soot removal, water extraction, structural drying, and drywall replacement ranges from $4,500 to $9,500 depending on square footage and how far smoke traveled. Add $800 to $2,000 if a detached workshop or garage needs separate treatment. The free estimate we give you is a written scope with line-item pricing, and it’s the price you pay. Call (850) 828-8896 and Rick Sumner will walk the property with you personally.
We Also Serve Cities Near Bloomingdale
While this page covers Fire Damage Restoration in Bloomingdale, our crews also respond to homes in Tampa, St. Petersburg, Riverview, and Plant City. The same written-price-first standard and local equipment staging applies across every community we serve. If you’re a few miles outside Bloomingdale, give us a call and we’ll tell you exactly when we can be there.
Serving Bloomingdale, FL - Our Local Coverage Area
We’re based in the Bloomingdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Fire Damage Restoration in Bloomingdale
Because Bloomingdale’s flat terrain and high water table mean the water used to suppress even a small kitchen fire has nowhere to drain. It pools against the slab, wicks up into gypsum drywall, and starts mold growth behind baseboards within 48 hours. We extract standing water and run commercial dehumidifiers on every fire job in Bloomingdale, even when the burn area looks small. Call (850) 828-8896 and we’ll assess whether your slab is holding moisture.
We use Dri-Eaz air movers, Phoenix desiccant dehumidifiers, and Injectidry systems that push dry air into wall cavities and under cabinets. Residential-grade units from a hardware store do not move enough air to dry a slab-on-grade home in Bloomingdale’s humid climate. Our IICRC-credentialed technicians set up the equipment same day and monitor moisture levels until the structure returns to a dry standard.
We use dry sponge techniques first on textured ceilings, because wet scrubbing drives soot deeper into the ridges and leaves a permanent gray stain. If the texture is heavily damaged, we remove and retexture the affected section to match. The goal is to remove the smoke residue without ruining the ceiling you already have, and our crews practice this on Bloomingdale ranch homes weekly during fire season.
Yes. Detached workshops and sheds often sit on separate slabs with independent electrical panels, so the fire’s spread pattern and the drying plan differ from the main house. We treat them as separate structures in the written scope, pack out tools and equipment for cleaning, and run dedicated drying equipment. Many Bloomingdale properties have woodshops or storage buildings, and we stock enough equipment to dry both structures simultaneously rather than waiting on a rental order.
In many cases, yes, we can repair or replace affected sections of original cast iron plumbing in Bloomingdale ranch homes. Heat from a fire can crack these pipes, and if the damage is isolated to a small run, we repair that section rather than replacing the whole drain system. We inspect all plumbing runs near the fire source before closing walls, and the cost is included in your written scope so there are no surprises after the fact.
Need a fast answer about your fire damage situation in Bloomingdale? Call (850) 828-8896 for a free estimate. Rick Sumner and our crews are ready to respond today with a written price and a plan that protects your home, your floors, and your family’s routine.
Written by Rick Sumner, Owner at Tidemark Water Damage Tampa, serving Bloomingdale and surrounding communities since 2006.